top of page
CVC Engineers Pte Ltd

Site Supervision for Structural Works in Singapore: QP RE and RTO Roles

Nov 11
5 min read

Updated: 6 days ago

Structural works in Singapore must be supervised by a Qualified Person (QP), and on larger projects by full-time site supervisors who work under that QP's control. The site supervisors are Resident Engineers (RE) and Resident Technical Officers (RTO), accredited by the IES/ACES Joint Accreditation Committee. BCA's current threshold is $7.5 million: at or below that value the critical structural works need immediate supervision by the QP, an RE or an RTO, and above it full-time site supervision applies.

What does the law require?

The Building Control Act, as published by BCA, sets three layers of supervision:

  • All building works are carried out under the supervision of an appropriate QP.

  • For large building works, the structural elements are carried out under the full-time supervision of a site supervisor, or a team of site supervisors, working under the QP's control and direction.

  • For small-scale building works, the critical structural works are carried out under the immediate supervision of the QP or of a site supervisor working under the QP. The Act names concreting, piling, pre-stressing and the tightening of high-friction grip bolts as critical structural works.

The Act defines immediate supervision as personally and directly exercising oversight, control and inspection of the works. Carrying out structural works without the required supervision is an offence with a fine of up to $200,000, imprisonment of up to two years, or both.

How many site supervisors does a project need?

BCA's site supervisor requirements page gives the following scale by value of building works:

  • Up to $7.5 million: immediate supervision by the appropriate QP, an RE or an RTO.

  • More than $7.5 million and up to $15 million: 1 RTO, full time.

  • More than $15 million and up to $30 million: 1 RE.

  • More than $30 million and up to $75 million: 1 RE and 1 RTO.

  • More than $75 million and up to $150 million: 1 RE and 2 RTOs.

  • More than $150 million: 2 REs and 3 RTOs, or 1 RE and 5 RTOs.

The value of building works is the total estimated cost at the time of application, including foundations, basements, structural frame, finishes and building services. It is not the structural contract sum alone. BCA allows a smaller team during piling and foundation works, after 80% completion of the building works, and during ancillary and external works. The QP has to notify BCA of the reduced deployment in the permit application.

What is the difference between an RE and an RTO?

Both are site supervisors under the Act. The difference is the level of qualification:

  • A Resident Engineer is generally degree-qualified. The routes listed by IES include a civil or structural engineering degree recognised for professional engineer registration, a relevant master's or doctoral degree, UK Chartered Engineer status in civil or structural engineering, or a degree from a university specified by the Commissioner of Building Control together with one year of relevant experience.

  • A Resident Technical Officer is typically diploma-qualified. Routes include a local degree or polytechnic diploma in civil or structural engineering, or other construction-related and foreign qualifications combined with a period of full-time structural supervision experience on site. IES notes that the experience requirement was raised from one year to two years from 15 December 2017.

Who accredits site supervisors?

BCA requires all site supervisors to be accredited by the Joint Accreditation Committee (JAC) of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore (ACES). IES states that accreditation of civil and structural REs and RTOs has been mandatory since 15 February 2009. Other points from the registry:

  • A professional engineer with a valid practising certificate does not need JAC accreditation to supervise structural works.

  • Renewal depends on performance assessment reports and continuing education credits in structural and safety topics.

The Act also deals with independence. A site supervisor for major building works may not be a partner, officer or employee of the developer or the builder, or of their associates.

What are the QP's supervision duties?

The QP appoints the site supervisors during the application for the permit to carry out structural works. Appointing them does not hand over the duty. Under the Act the supervising QP must:

  1. Take all reasonable steps and exercise due diligence in supervising and inspecting the works, so that they follow the Act, the regulations, the approved plans and any conditions imposed by BCA.

  2. Give immediate supervision to critical structural works when no site supervisor is present.

  3. Notify the Commissioner of Building Control of any contravention the QP knows of or ought reasonably to know of.

  4. Keep the prescribed documents, books and records on site.

  5. Submit the prescribed reports and certificates, and notify the Commissioner if the works are suspended for more than 3 months.

The regulations add specific duties for excavations: the supervising QP regularly inspects excavations and earth retaining structures, reviews the monitoring instruments, and notifies the Commissioner when ground movement exceeds the allowable limits. BCA also publishes a Site Supervision Plan guidebook and template, a Remote Site Supervision guidebook, and a risk-based inspection framework that the QP uses to match supervision to the risk level of the works. At completion the QP's Certificate of Supervision is one of the documents for TOP and CSC.

Which authority governs what?

  • Building Control Act: the duty to supervise, the appointment and duties of site supervisors, and the offences.

  • Building Control Regulations 2003: the value bands for large and small-scale building works, the number of site supervisors, and site records.

  • BCA: permit processing, the site supervisor requirements, and supervision guidance.

  • IES/ACES Joint Accreditation Committee: accreditation and renewal of REs and RTOs.

  • Professional Engineers Board: registration and practising certificates of the QP. See how to check a Professional Engineer.

Temporary works on site raise separate questions, covered in our articles on scaffolds and lifting operations.

What goes wrong

  • Critical works such as a concrete pour proceed with neither the QP nor an accredited supervisor present.

  • The project value is understated. The value includes finishes and building services, and it sets the size of the supervision team.

  • The supervisor's accreditation has lapsed, or the supervisor is employed by the builder.

  • Site records are incomplete, which surfaces when the Certificate of Supervision and record plans are due.

  • Each party assumes another is checking. In Leong Sow Hon v Public Prosecutor [2020] SGHC 228, which followed the 2017 viaduct collapse at Upper Changi Road East, the High Court held that an accredited checker's duty is personal and is not reduced by the responsibilities of the QP or the builder. The lesson carries over to supervision: no party's duty is discharged by someone else's.

  • Structural works are built with no approval at all, so no supervision was ever appointed. Our article on unauthorised mezzanines and building works looks at those cases.

FAQ

Does a small renovation need an RE or RTO?

Not necessarily. For building works valued at up to $7.5 million, the critical structural works may be supervised directly by the QP. An RE or RTO working under the QP is the alternative.

Can the builder's own engineer act as the site supervisor?

Not for major building works. The Act bars a site supervisor from being a partner, officer or employee of the developer or builder, or of their associates.

Does a professional engineer need JAC accreditation to supervise?

No. IES states that a professional engineer with a valid practising certificate can supervise structural works without JAC accreditation.

Sources

CVC Engineers advocates education and public awareness, and has a dedicated team to help resolve this properly. See our BCA submission services and additions and alterations pages, or WhatsApp +65 9342 7551. Last reviewed: November 2026.

Recent Posts

See All
Singapore Building Compliance Handbook 2027

A map of Singapore building compliance rules for 2027: PE endorsement, QP submissions, geotechnical, demolition, inspection, factories, landed houses, procurement and a dated 2027 at-a-glance list, wi

 
 
 

Comments


© 2024 CVC Engineers. All rights reserved.

bottom of page