How to Check a Professional Engineer in Singapore: PEB Registration and Practising Certificates
Updated: 7 days ago
To check a Professional Engineer (PE) in Singapore, look the person up in the Professional Engineers Board (PEB) Directory of Professional Engineers with Practising Certificates. Registration alone is not enough: a registered PE needs a practising certificate, renewed every year, to engage in professional engineering work, and the certificate only covers the branch of engineering the PE is qualified to practise. If the name is not in the directory, or the branch does not match the work, ask questions before relying on the endorsement.
What is a Professional Engineer?
A Professional Engineer is a person registered with PEB under the Professional Engineers Act 1991. PEB registers engineers, keeps the registers, licenses firms that supply professional engineering services, and sets and enforces standards of professional conduct.
According to PEB, an applicant for registration must:
hold an approved degree or qualification;
have at least four years of relevant practical experience;
pass the Fundamentals of Engineering Examination and then the Practice of Professional Engineering Examination;
attend a professional interview.
What is the difference between registration and a practising certificate?
PEB keeps a register of professional engineers and a separate register of practitioners. The distinction matters:
Registration shows the person has met the qualification, experience and examination requirements.
A practising certificate is what authorises a registered PE to engage in professional engineering work in Singapore. PEB states that it is renewed on an annual basis and authorises work only within the branch of engineering the PE is qualified to practise.
Renewal is tied to continuing professional development. PEB requires a minimum of 40 professional development units over the qualifying period, at least 20 of them from structured activities.
The same point appears in building law. Under the Building Control Act, a Qualified Person is a registered architect or a professional engineer who holds a valid practising certificate. Our article on PE endorsement versus QP submission explains the two roles.
Which branches of engineering are registered?
PEB registers professional engineers in four branches:
civil
electrical
mechanical
chemical
The branch decides what a PE may endorse. BCA states that only a Qualified Person who is a professional engineer in the civil or structural discipline can apply for structural plan approval. A mechanical or electrical PE is the right person for mechanical or electrical systems, not for a floor slab, a mezzanine or a retaining wall.
What is a Specialist Professional Engineer?
PEB also registers specialist professional engineers in specialised branches, and lists them in a separate directory. Two sets of branches are confirmed in agency sources:
Geotechnical engineering. PEB states that a PE in civil engineering with a valid practising certificate, who meets the qualification and practical experience requirements in geotechnical engineering, may apply.
Lift and escalator, crane, access platform, and pressure vessel engineering. A Ministry of Manpower circular records that PEB introduced these four branches from 1 January 2017, and that MOM recognises a specialist PE in the relevant branch as qualified to be an Authorised Examiner in the corresponding field.
So for the statutory examination of a crane or pressure vessel, the specialist directory is the one to check, not the general one. See PE endorsement for lifting operations for how this fits with lifting plans and crane foundations.
How do you search the PEB directory?
Go to the PEB website and open "Find a Professional Engineer".
Choose the directory that fits your question from the list below.
Look up the engineer's name and confirm the branch against the work you need endorsed.
If the name does not appear, check the suspended and deregistered list, then ask the engineer directly.
PEB's directories include:
Directory of Professional Engineers with Practising Certificates
Directory of Specialist Professional Engineers with Practising Certificates
Directory of Registered Foreign Professional Engineers
Directory of Licensed Corporations and Partnerships
List of Suspended and Recently Deregistered PEs
The directories list engineers with active practising certificates, so a person who is registered but has not renewed will not appear.
What should you check on a PE-endorsed document?
Whatever the layout of the stamp or signature block, the checks are the same:
Name. Does the name on the endorsement match an entry in the PEB directory?
Branch. Is the PE registered in the branch that covers the work? Structural calculations call for a civil PE.
Currency. Was a practising certificate in force when the document was endorsed? Certificates are annual.
Engagement. Was the PE actually engaged for your project and site? An endorsement prepared for a different site or load case does not transfer.
Our complete guide to PE endorsement describes what a proper endorsement includes, and the PE endorsement services page lists typical scopes.
Does an engineering company need a licence?
A company is not a PE. PEB licenses four forms of organisation to supply professional engineering services: limited corporations, unlimited corporations, multi-discipline partnerships and limited liability partnerships. A licence is valid for one calendar year. Among PEB's published requirements:
a registered PE with a valid practising certificate must control the engineering work;
a limited corporation needs paid-up capital of at least $500,000 and professional liability insurance.
PEB's guidance adds that a partnership consisting wholly of registered professional engineers does not need a licence, and that a licensed corporation offering further disciplines must do so through its own employed PEs, not through freelance PEs outside the firm. You can check a firm in the Directory of Licensed Corporations and Partnerships.
Which authority governs what?
PEB, under the Professional Engineers Act 1991: registration, practising certificates, specialist registration, licensing of firms and discipline.
BCA, under the Building Control Act 1989: who may act as a Qualified Person for building works, and the further roles of Accredited Checker and site supervisors.
MOM: approval of Authorised Examiners, drawn from specialist PEs in the relevant branch.
Common mistakes
Checking registration but not the practising certificate. Only the certificate authorises practice.
Accepting the wrong branch. A PE's authority stops at the branch on the certificate.
Assuming the firm's name is enough. The endorsement is personal to a named PE, and the firm needs its own PEB licence.
Treating endorsement as a formality. BCA's published enforcement list records a Qualified Person fined $60,000 in November 2025 for authorising building works without approved plans and making a false declaration in a certificate of supervision.
FAQ
Is a registered engineer automatically allowed to endorse drawings?
No. PEB states that a registered professional engineer needs a practising certificate to engage in professional engineering work, and it covers only the PE's branch.
Does overseas registration count in Singapore?
Not by itself. PEB gives no exemption from its examinations for overseas registration. It keeps a separate Directory of Registered Foreign Professional Engineers.
Where do I find a specialist such as a geotechnical engineer?
In PEB's Directory of Specialist Professional Engineers with Practising Certificates.
Sources
CVC Engineers advocates education and public awareness, and has a dedicated team to help resolve this properly. For a consultation with a Professional Engineer, WhatsApp +65 9342 7551. Last reviewed: November 2026.


Comments