top of page
CVC Engineers Pte Ltd

What a PE Endorsement Carries: Liability Duties and Penalties for Engineers

7 days ago
8 min read

A Professional Engineer who signs and stamps a document in Singapore takes on personal responsibility for it under three separate systems: statutory duties and criminal penalties under laws such as the Building Control Act, professional discipline by the Professional Engineers Board (PEB), and civil liability to the client and others who rely on the work. The Building Control Act alone provides for fines of up to $100,000 and imprisonment of up to two years for an accredited checker who fails in the duty to check, and a 2020 High Court decision upheld a six-month prison sentence for exactly that.

This page sets out what the engineer takes on and what it means for owners. It is part of our PE endorsement guide.

What does an engineer take on by signing a PE endorsement?

By signing, the engineer personally certifies that he or she did the work described and that it complies with the law, and becomes answerable for that statement to the authority, to PEB and to the client. BCA's standard certification for structural plans has the Qualified Person certify that the plans and design calculations were "prepared by me" and designed in accordance with the Building Control Act, the Building Control Regulations and any other applicable law.

The responsibility attaches to the individual, not only to the firm. For what the certification says in other situations, see PE endorsement meaning.

What are a Qualified Person's statutory duties under the Building Control Act?

A Qualified Person must take all reasonable steps and exercise due diligence to ensure that building works are designed, and where appointed to supervise, carried out, in accordance with the Building Control Act, the building regulations and the approved plans. BCA restates the design duty in its own guidance: its June 2026 circular on earth retaining structures reminds Qualified Persons that they have duties under the Act "to take all reasonable steps and exercise due diligence to ensure that building works are designed in accordance with the provisions of the Building Control Act and building regulations".

BCA's published enforcement list shows how the duties are framed in practice. Entries against Qualified Persons include:

  • failing to take all reasonable steps and exercise due diligence in supervising and inspecting building works to ensure they are carried out in accordance with the approved plans;

  • failing to notify the Commissioner of Building Control of deviations from the approved structural plans;

  • permitting or authorising building works without approved plans, or in deviation from approved plans;

  • making a false declaration in a certificate of supervision of structural works.

The High Court has described the structure of the Act in one sentence: section 9 sets out the duties of Qualified Persons, section 10 those of site supervisors, section 11 those of builders, and section 18 those of accredited checkers. Each role has its own duties, and one party cannot rely on another to discharge them. Our article on site supervision roles covers the supervision side.

What professional conduct rules apply, and what can PEB do?

PEB is the statutory board that sets and enforces the standards of professional conduct for engineers, and it can investigate complaints and impose penalties including censure, financial penalties and suspension. PEB was established in 1971 under the Professional Engineers Act and sits under the Ministry of National Development. Its stated functions include establishing and maintaining standards of professional conduct and ethics, and hearing and determining disputes relating to the professional conduct or ethics of professional engineers.

The conduct standard is contained in the Professional Engineers (Code of Professional Conduct and Ethics) Rules, which PEB describes as setting the code for registered professional engineers, licensed corporations and partnerships. Every professional engineer also makes the Professional Engineer's Pledge, which includes promises to:

  • act with prime regard to public safety and interests;

  • exercise due diligence;

  • comply with laws and regulations;

  • adhere to the code of professional conduct.

An Investigation Committee appointed by the Board inquires into a complaint and may refer it to a Disciplinary Committee, which holds a formal inquiry.

How often are engineers disciplined, and with what outcomes?

PEB's annual reports show a small but steady number of disciplinary cases each year, with penalties that have included fines of up to $24,000, censure, suspension and loss of the right to practise. The published figures, without names, are:

  • FY2023 (year to 31 March 2024): Investigation Committees completed 3 complaint cases; 2 were referred to Disciplinary Committees and 1 engineer received a warning letter. Disciplinary Committees completed 3 formal inquiries. All 3 engineers were ordered to pay financial penalties ranging from $2,500 to $12,000, and one was also censured.

  • FY2024 (year to 31 March 2025): 3 complaint cases completed, all referred to Disciplinary Committees. 3 formal inquiries completed; all 3 engineers were ordered to pay financial penalties ranging from $18,000 to $24,000.

  • FY2025 (year to 31 March 2026): 4 complaint cases completed, all referred to Disciplinary Committees. 3 formal inquiries completed; all 3 engineers were ordered to pay financial penalties ranging from $10,000 to $20,000. In addition, one was suspended for 6 months, and another was prohibited from practising for the rest of the term of his practising certificate and not allowed to renew it.

The top of the fine range was $12,000 in FY2023, $24,000 in FY2024 and $20,000 in FY2025, and FY2025 is the only one of the three years in which the reports record an engineer losing the right to practise. See how to check a Professional Engineer.

Can an engineer be fined or jailed for an endorsement?

Yes. Engineers have been fined and, in one reported case, jailed for failing in duties attached to their signature under the Building Control Act.

  • [2020] SGHC 228. An accredited checker pleaded guilty to an offence under section 18 of the Building Control Act for failing to evaluate, analyse and review the structural design of, and perform independent calculations for, key structural elements of a viaduct that collapsed during construction on 14 July 2017. He was sentenced to six months' imprisonment, and the High Court dismissed his appeal. The Court noted that the collapse was not caused by the elements he had failed to check; the offence was the failure to check. The maximum penalty for the offence is a fine of $100,000, imprisonment for two years, or both, a level the Court noted had been doubled by amendments in 2008.

  • BCA enforcement list, November 2025. A Qualified Person for structural works was convicted and fined $60,000 for authorising building works without approved plans and making a false declaration in a certificate of supervision.

  • BCA enforcement list, November 2024 and March 2024. Qualified Persons for structural works were fined $50,000 for permitting works in deviation from approved plans, and $40,000 for failing to exercise due diligence in supervision and failing to notify the Commissioner of deviations.

In the 2020 case the High Court described signing off on building plans without having them checked at all as an abandonment of the checker's duty, and more serious than negligence in the checking itself. More on the checker's role is in when a project needs an Accredited Checker.

What about civil liability and professional indemnity insurance?

Separately from any offence, an engineer generally owes the client a contractual duty to exercise reasonable skill and care, and can be sued for losses caused by negligent design or certification.

PEB's licensing requirements recognise the exposure. A limited corporation licensed to supply professional engineering services must be insured against professional liability and have at least $500,000 in paid-up capital, and a licensed limited liability partnership must also be insured against professional liability. PEB reported 298 licensed corporations and partnerships at 31 March 2026.

Why would a PE refuse to endorse?

A PE will refuse when he or she cannot honestly make the statement in the certificate. Common reasons:

  • The work is outside the engineer's branch. The practising certificate authorises work only within the branch the engineer is qualified to practise.

  • The design or the calculations were prepared by others and cannot be verified.

  • There is no access to the approved structural plans, or to the site, so the existing structure cannot be checked.

  • The works have already been built without approval. The engineer cannot backdate a certificate; the route is regularisation, which involves assessment and a submission.

Why is "chop-and-sign" without checking a breach of duty?

Stamping a document without checking it means certifying something the engineer does not know to be true, which cannot be reconciled with the certificate wording, the pledge to exercise due diligence, or the statutory duties. BCA's published certificates are written in the first person and describe work personally done: plans "prepared by me", an existing building "inspected" and "investigated", an approved structural plan "personally checked".

Where the certificate is a statutory one, a false statement in it is an offence in its own right, as the false declaration convictions on BCA's list show. Where the document is a private certification to a landlord or management corporation, the engineer remains bound by the code of professional conduct and may face a civil claim from a party who relied on it.

What does this mean for owners?

For owners, the liability the engineer carries is the reason an endorsement has value, and the reason a genuine one cannot be instant.

  • A real check takes time. The engineer needs the approved structural plans, a site inspection in most renovation and alteration cases, and time to run or review calculations. See what to prepare before you engage an engineer.

  • The cheapest stamp is a risk. If an engineer has not checked, the certificate does not reduce the physical risk at all, and the owner remains the person whose building is affected. If the endorsement is later rejected, the owner pays again. For how fees are built up, see PE endorsement cost.

  • Endorsement does not move the owner's duties. Carrying out building works without approved plans or a permit carries a fine of up to $200,000, imprisonment of up to two years, or both, and BCA's enforcement list includes developers and builders as well as Qualified Persons.

  • Scope matters. An endorsement of design is not supervision of construction. Our guide to when PE endorsement is required lists the cases.

Which authority governs what?

PEB disciplines engineers; BCA and the courts enforce the Building Control Act.

  • PEB, Professional Engineers Act 1991 and its Rules: registration, practising certificates, the code of professional conduct and ethics, investigation and discipline.

  • BCA, Building Control Act 1989: duties of Qualified Persons, site supervisors, builders and accredited checkers, with prosecution through the courts.

Common mistakes

  • Assuming harm must occur before there is an offence. In [2020] SGHC 228 the collapse was not caused by the unchecked elements.

  • Believing the firm, not the engineer, carries the responsibility.

  • Asking an engineer to endorse works already built as if they were proposed.

FAQ

Is a PE personally liable for what he or she stamps?

Yes. The certificate is given in the engineer's own name, and statutory duties, PEB discipline and civil claims can all attach to the individual.

Can a PE go to jail for a wrong endorsement?

It has happened. In [2020] SGHC 228 an accredited checker was sentenced to six months' imprisonment for failing to check key structural elements.

What can PEB do to an engineer?

PEB's annual reports record warning letters, censure, financial penalties, suspension, and prohibition from practising with no renewal of the practising certificate.

Is "chop-and-sign" without checking allowed?

No. An engineer who stamps a document without checking it is certifying something he or she does not know to be true.

Does the owner have any liability if a PE has endorsed?

Yes. The owner's own duties remain, including obtaining approval and a permit where required. See 10 common misunderstandings about PE endorsement.

Sources

CVC Engineers advocates education and public awareness, and has a dedicated team to help resolve this properly. For PE endorsement services or a consultation with a Professional Engineer, WhatsApp +65 9342 7551. Last reviewed: November 2026.

Recent Posts

See All

Comments


© 2024 CVC Engineers. All rights reserved.

bottom of page