Periodic Structural Inspection in Singapore: Stage 1 Stage 2 and What Happens Next
A Periodic Structural Inspection (PSI) is the inspection that section 28 of the Building Control Act 1989 requires for almost every building in Singapore: every 5 years for non-residential buildings and every 10 years for residential ones. BCA serves a notice, the owner appoints an independent Professional Engineer, and that engineer carries out a Stage 1 visual inspection and reports to BCA. Only if Stage 1 finds suspected defects of structural significance does the building move to Stage 2, a full structural investigation that needs BCA's approval before it starts.
What is the legal basis for the PSI?
The PSI is governed by Part 5 of the Building Control Act 1989 and Part 2 of the Building Control (Periodic Inspection of Buildings and Building Facades) Regulations 2021. BCA's Guidelines for Structural Engineers record that the regime was introduced with the Act in 1989. The working documents are BCA's PSI Guidelines for Structural Engineers (enhanced on 1 September 2022 under circular APPBCA-2022-20 and updated in September 2024) and the Owner's Guide of September 2024. The stated purpose is to detect structural defects caused by lack of maintenance early, so that buildings stay sound for continued occupation as they age. The PSI is one of several statutory checks; the full list is in our building inspection guide.
Which buildings need a PSI, and which are exempt?
The PSI applies to all existing buildings except landed houses used solely as residences and temporary buildings. The intervals are:
Every 10 years for buildings where at least 90% of the floor area is used solely for residential purposes, such as condominiums and apartments.
Every 5 years for all other buildings, including commercial, industrial, institutional and mixed-use buildings.
Every 5 years for listed civil engineering structures: jetties, docks and wharves (notices from December 2024) and bridges, underpasses and floating structures (notices from March 2025), under circular APPBCA-2024-13.
Detached, semi-detached, terraced and linked houses used solely as places of residence are excluded. Culverts, sewers, drains and standalone retaining walls are currently exempt, and BCA's Owner's Guide adds that utility bridges not generally accessible to the public are not required to undergo PSI. A recent renovation or ongoing addition and alteration works do not postpone the inspection, because those works do not involve an independent engineer's structural inspection report. A planned demolition or sale does not automatically exempt the building either: BCA asks owners to write in, and a buyer may take over compliance only if BCA agrees.
What does the BCA notice require of the owner?
The notice requires the owner to appoint a structural engineer, give access, see that the report reaches BCA by the deadline in the notice, and carry out the recommended rectification. In a strata-titled development the management corporation takes on these responsibilities. Where a building has several owners but no management corporation, section 28(4) of the Act requires all the owners to appoint the same engineer jointly, and that engineer must inspect all units and submit one joint report. The appointment is made on Form D2. The engineer must comply with the deadlines in the notice and in any written direction, and must apply to BCA for an extension at least 5 days before a deadline that cannot be met.
Who can be appointed as the structural engineer?
Only a registered Professional Engineer in the civil or structural discipline, holding a valid practising certificate and having no professional or financial interest in the building, can carry out a PSI. BCA's Owner's Guide gives the example that a PE who was responsible for the design or construction of the building, or of any of its building works, is treated as having such an interest. The engineer must inspect personally. BCA's circular APPBCA-2026-02 of 2 March 2026 lists as unacceptable the delegation of an inspection entirely to staff, the reuse of photographs from a previous cycle, and coverage below the minimum in the Guidelines, and states that enforcement action will be taken against engineers who do not comply. You can verify an engineer's registration using the steps in how to check a Professional Engineer.
What does the Stage 1 visual inspection cover?
Stage 1 is a visual inspection of three things: the condition of the structure, the loading on it, and any unauthorised structural works. Before starting, the engineer must obtain the building's latest structural layout plans from BCA, in order to understand the structural system, identify critical elements and check the allowable imposed loads. The Guidelines then set minimum coverage where it is not possible to inspect 100% of the building:
All special and critical structures (such as transfer beams, slender columns and long spans) and all structures without redundancy (such as cantilevers, hangers, nibs and corbels) must be inspected, with finishes opened up if they are concealed.
In residential developments, at least 20% of units in buildings up to 30 years old and 30% in older buildings, including all rooftop units and at least one unit on every other storey. BCA's guide for increased coverage is 40% for buildings over 40 years old and 60% over 60 years.
At least 30% of cladded columns exposed for inspection.
In non-residential buildings, all units, with at least one suspended ceiling opened for every 500 sqm indoors and every 250 sqm in areas exposed to weather.
Slopes, retaining walls, safety barriers and heavy suspended fixtures in crowded areas within the premises.
For residential buildings built before 1989, a supplementary checklist applies to small, narrow or slender void deck columns designed in grade 20 concrete (as a guide, a minimum width of 300 mm or less), where BCA asks engineers to consider a full structural investigation seriously. The report classifies each defect as being of no structural significance, as requiring remedial action or monitoring, or as a suspected defect of structural significance requiring full investigation and immediate action. It is submitted with a visual inspection certification: Form D3 for non-structural or minor structural defects, or Form D4 where structural defects are suspected in localised areas or the whole building.
When is a Stage 2 full structural investigation triggered?
Stage 2 is triggered when the Stage 1 engineer recommends it because defects of structural significance are suspected, and BCA grants approval. If the deficiency is local, the engineer may first recommend an investigation of that area only, with the scope and extent defined and approved by BCA; its outcome may lead to an investigation of the whole building. According to the Guidelines, the scope of a full structural investigation includes:
Gathering information on the design, construction, maintenance and history of the building.
Assessing structural adequacy by checking the structural plans and calculations, and reconstructing the plans if they are not available.
Tests on the materials used and on structural elements.
Load tests on parts of the building if necessary.
Recommendations for safety precautions and remedial measures to restore structural stability and integrity.
The owner may engage a different structural engineer for Stage 2 and should give BCA written notice of that appointment before the investigation starts. BCA's Structural Inspection Certification forms are Form D5 (defects of no structural significance) and Form D6 (defects of structural significance).
What happens after the report is submitted?
BCA vets the report and may ask the engineer for clarification, a joint site inspection or a presentation. Once the report is accepted, BCA writes to the owner to follow up on the engineer's recommendations, and the owner must carry out the remedial works and then submit the engineer's certification of completion where applicable (Form D7 covers supervision of remedial works). Two points catch owners out. First, the Guidelines state that major repairs and strengthening are building works, so plan approval, a permit and supervision apply; see our guides to BCA submissions and to structural strengthening. Second, selling the building does not remove the obligation: BCA's answer to whether a seller can be exempted from recommended repairs is no.
Since 1 February 2023 BCA has also run a Differentiated PSI Approach, with closer scrutiny of the inspection method and report for ageing buildings. By December 2024 BCA had held over 120 such sessions with engineers, owners and facilities teams (circular APPBCA-2024-19).
What are the penalties?
The inspection duties in Part 5 of the Building Control Act 1989 are backed by criminal penalties, and BCA's March 2026 circular states that enforcement action will be taken against engineers who fail to comply. We do not quote the PSI fine here because BCA's current PSI pages do not state it; the figures BCA does publish for the parallel facade regime under the same Part are a fine of up to $20,000 for an owner who does not appoint a Competent Person within 2 months, and up to $50,000 for a Competent Person who does not inspect as required. Separately, unauthorised structural works found during a PSI expose the owner to the general penalty for building works without approval: a fine of up to $200,000, imprisonment of up to 2 years, or both. Ask your engineer to confirm the current penalty provisions against the Act on Singapore Statutes Online.
What should owners prepare?
Owners should prepare documents and access before the engineer's first visit. BCA's Owner's Guide lists:
A set of as-built structural layout plans. If you do not have them, your engineer can apply to BCA on your behalf with documentary proof of ownership; see how to buy approved structural plans and building plans from BCA.
The maintenance history, especially any addition and alteration works.
Previous PSI reports. Since circular APPBCA-2024-19, owners can ask BCA to release past reports by submitting a consent form on receiving the notice.
Access to critical parts of the building, including removal of cladding or false ceilings where the engineer asks, and ladders, platforms or other access equipment.
Early notice to occupants of rooftop units and wet areas, which BCA identifies as particularly prone to defects.
In non-residential buildings, a floor diagram on every storey showing the design load. The March 2026 circular asks engineers to check that these are displayed and verified against the approved plans.
What do PSI reports commonly find?
The Guidelines list the signs engineers record: cracks, excessive deflection, spalling concrete, corrosion of steel, settlement and tilt, and termite attack or rot in timber. In practice three groups of findings drive most follow-up work:
Deterioration from water and age, typically spalling concrete at roofs, wet areas and exposed cantilevers. See spalling concrete and ceiling leaks and common structural defects by age.
Overloading and change of use, especially in industrial buildings and in shophouses converted from residential to commercial use. From May 2026 a 12-month BCA and URA pilot requires engineers to declare the observed use of shophouses during PSI.
Unauthorised works, such as an additional floor inserted in a high-volume space. The engineer must report them and advise the owner to remove or regularise them; see unauthorised mezzanines and building works and regularisation of unauthorised structures.
Common mistakes
The most common mistake is treating the PSI as a photograph exercise. BCA's Guidelines say a report that could be reused for any building with minor changes defeats the purpose of the Act, and so does a thick book of photographs with no engineering input. Other avoidable problems:
Appointing late, then asking for extensions. Requests must reach BCA at least 5 days before the deadline.
Refusing to open up finishes. Under section 28(5) and (5A) of the Act the owner must allow and facilitate the removal of architectural finishes that the engineer needs removed.
Assuming a facade inspection covers it. PSI and PFI are different regimes with separate reports; see PSI vs PFI.
Carrying out major repairs without plan approval.
FAQ
How often is a PSI required?
Every 10 years for buildings where at least 90% of the floor area is solely residential, and every 5 years for all other buildings and for the listed civil engineering structures.
Can I choose any engineer for the PSI?
No. The engineer must be a registered PE in civil or structural engineering with a valid practising certificate and no professional or financial interest in the building.
Does every building go through Stage 2?
No. If Stage 1 shows no signs of defect, deformation or deterioration, the visual inspection suffices. Stage 2 happens only on the engineer's recommendation and with BCA's approval.
Can I use a different engineer for Stage 2?
Yes. The owner may engage a different structural engineer and should inform BCA in writing before the investigation is carried out.
My tenants will not give access in time. What can I do?
Write to BCA for an extension of time, stating the reasons. BCA's Owner's Guide gives this answer for tenanted buildings.
Can a unit owner ask the MCST's engineer to inspect their unit?
Yes. BCA's guide says a unit owner can request this through the management corporation.
What should I do if I see a serious defect between inspections?
Do not wait for the next notice. BCA advises owners to engage a structural engineer to investigate whenever defects or deterioration are detected; see dangerous buildings: BCA orders, closure and owner duties.
Sources
BCA: PSI for civil engineering structures, circular APPBCA-2024-13 (2 September 2024)
BCA: findings on the enhanced PSI Guidelines, circular APPBCA-2024-19 (2 December 2024)
BCA: reminder on proper conduct of PSI, circular APPBCA-2026-02 (2 March 2026)
URA and BCA: pilot for usage declaration in shophouses during PSI (8 May 2026)
CVC Engineers advocates education and public awareness, and has a dedicated team to help resolve this properly, and carries out periodic structural inspections for building owners and management corporations. WhatsApp +65 9342 7551. Last reviewed: November 2026.


Comments