top of page
CVC Engineers Pte Ltd

PE Endorsement for Wall Hacking in HDB Flats and Condos: Rules and Process

7 days ago
8 min read

In an HDB flat, every wall demolition needs HDB's approval first, and HDB requires a Professional Engineer (PE) in civil or structural engineering to supervise the work when the element being removed is non-load bearing reinforced concrete, such as an RC partition wall, party wall, stiffener, lintol or hanger. Structural members and household shelter walls cannot be hacked at all, with or without a PE. In a condominium the rule comes from a different place: BCA advises management corporations to ask for renovation plans endorsed by a civil or structural PE before approving any demolition other than floor tiles.

This guide covers the HDB rules in detail and the condo position in brief. It sits under our main guide to PE endorsement in Singapore.

When does HDB require a PE for wall hacking?

HDB requires a PE for civil or structural works to supervise the demolition of non-load bearing reinforced concrete (RC) elements, and it tells the owner and contractor whether a PE is needed after it receives the renovation application. HDB's building works guidelines list three kinds of wall work, all of which need a permit:

  • Demolition of non-load bearing RC elements, such as partition walls, party walls, stiffeners, lintols or hangers. A PE must supervise the demolition and must ensure proper repair of any RC structural elements affected by it. A copy of the approved plan and the conditions of approval must be given to the PE.

  • Demolition or alteration of internal non-structural lightweight partition walls, such as hollow block or brick walls, drywalls or Ferrolite walls. HDB's listed conditions for this category do not include a PE.

  • Creating an opening in a non-structural wall between two flats.

HDB explains the reason on its renovation permit page: engaging a Qualified Person to inspect and supervise the demolition helps to ensure that no load bearing RC structural elements, such as columns, beams, slabs and walls, are damaged in the process. The practical rule is simple: submit the proposal, and engage a PE when HDB says the work needs one.

What can never be hacked in an HDB flat?

Structural members and the household shelter cannot be hacked. HDB's list of disallowed building works includes "hacking and removal of structural members such as reinforced concrete wall, columns, beams, slabs, and staircases within executive maisonettes". A PE's endorsement does not change this. The engineer's role in a flat is to keep the demolition away from the structure, not to authorise removing it.

For the household shelter, HDB states that the reinforced walls, reinforced floor slab, ceiling and steel door must not be tampered with during renovation. The works not permitted include:

  • Indiscriminate hacking and drilling of the shelter walls, floor slab and ceiling slab, other than drilling under permitted works

  • Hacking either face of the shelter walls to form a key for tiling

  • Hacking the external face of a shelter wall to mount feature wall panels or wall tiles

  • Modifying, changing, removing or tampering with the shelter door

What conditions apply when a non-structural wall is hacked?

Even an approved demolition has conditions. For block and brick walls, HDB's guidelines say:

  • All demolition or alteration of walls can only be carried out after obtaining HDB's approval.

  • Existing RC structures shall not be tampered with during the works.

  • Demolition is allowed only up to the underside of the RC beam or slab.

  • Demolition should start from the top and work down.

  • Lightweight drywalls and Ferrolite walls should be removed in full, from joint to joint.

  • If steel bars are discovered during the demolition, the works must stop and HDB must be informed immediately.

Steel bars in a wall that was assumed to be brick mean the wall is not what the contractor thought it was. Our article on hacking versus demolition explains how the same distinction is drawn under the Building Control Act.

What is the HDB renovation permit and who applies for it?

The renovation permit is HDB's prior written approval for regulated works, and the renovation contractor applies for it electronically on the owner's behalf. HDB's permit page sets out the mechanics:

  • The owner authorises the contractor, and the contractor attaches an acknowledgement form signed by the owner to the electronic application. HDB sends the owner an SMS when it receives the submission.

  • For works such as demolition of walls, HDB conducts an evaluation, and the contractor must submit the flat's floor plan showing the proposed work. If the owner does not have the floor plan from the sales brochure, HDB sells a copy for $5 through its Purchase of Residential Floor Plan e-Service or at a branch kiosk.

  • The owner can check the permit online once it is granted.

  • After the permit is granted, a Notice of Renovation must be displayed outside the flat until the works are completed.

HDB's renovation guideline pages do not name a specific form for the PE. What they do require is that the approved plan and the conditions of approval are handed to the engaged PE, so any PE acknowledgement or supervision paperwork should be the version HDB issues or asks for on that job, not a contractor's own template.

Who is allowed to do the hacking?

Only a contractor listed in HDB's Directory of Renovation Contractors (DRC) may carry out renovation in a flat. HDB cites the Housing and Development (Renovation Control) Rules 2006 for this requirement. The PE is a separate appointment from the contractor: the contractor does the work and holds the permit, and the PE supervises the demolition of RC elements where HDB requires it.

A PE must be registered with the Professional Engineers Board and hold a practising certificate in the right branch. The steps are in how to check a Professional Engineer.

What is the step-by-step process?

  1. Get the flat's floor plan and mark the walls to be removed. Check any precinct-specific renovation guidelines on MyHDB Page, since DBSS and other special precincts have their own.

  2. Engage a DRC contractor and sign the acknowledgement form.

  3. The contractor submits the electronic application with the floor plan showing the proposed work.

  4. HDB evaluates the proposal and tells the owner and contractor whether a PE or Qualified Person must be engaged.

  5. If required, engage a PE in civil or structural engineering. Give the PE the approved plan and the conditions of approval.

  6. Give written notice to neighbours within a radius of two units at least 5 days before the works begin, and display the Notice of Renovation.

  7. Carry out the demolition within the permitted hours, top down, stopping at the underside of the beam or slab. Where a PE is required, the PE supervises.

  8. Stop and inform HDB if steel bars are found.

  9. Repair any affected RC elements as the PE directs, then inform the HDB branch once the renovation is completed.

How long does it take?

HDB does not publish a processing time for wall demolition applications on the pages cited here, but it does fix how long the work itself may take. Its general terms and conditions state:

  • Approved renovations must be completed within 1 month of the permit for existing blocks and 3 months for newly completed blocks.

  • A contractor may not take more than 3 consecutive days to demolish walls or remove wall and floor finishes.

  • Restricted works such as demolishing walls may be carried out only between 9.00 am and 5.00 pm on weekdays. They are not allowed on Saturdays, Sundays, public holidays and the eves of New Year's Day, Chinese New Year, Deepavali, Hari Raya Puasa and Christmas Day.

  • Only 2 HDB-approved handheld power tools, or their equivalent, may be used at any one time.

Who pays, and what drives the cost?

The flat owner pays. HDB's terms state that the owner bears all charges and costs of the approved work, that HDB is not a party to the agreement between owner and contractor, and that the owner pays for haulage and debris removal where the Town Council provides it.

"HDB PE endorsement cost" is one of the most searched phrases on this topic, and we do not quote a figure here because the engineer's time differs from flat to flat. What drives it:

  • Whether HDB has asked for a PE at all, and for which elements

  • The number and type of RC elements being removed

  • How many site attendances the supervision needs

  • Whether any repair to adjoining RC elements has to be specified and inspected

  • Whether usable floor plans are available

For how fees are built up, see PE endorsement cost in Singapore, and ask for a written quotation based on your floor plan and scope.

What happens if a wall is hacked without approval?

HDB treats work done without a permit as unauthorised and can require the owner to reinstate the flat to its original condition. HDB's stated consequences are:

  • HDB will require the owner to discontinue, correct or remove unauthorised works and reinstate the flat. If the work is allowed to be retained, the owner pays an administrative fee.

  • An owner who does not engage a DRC contractor, or who breaches HDB's renovation rules or guidelines, can on conviction be fined up to $5,000. The same maximum applies to a DRC contractor who breaches the rules and to an unlisted contractor who carries out renovations.

  • HDB may compound offences, and offenders who do not pay the composition sum are prosecuted in court.

  • If the owner fails to follow the guidelines, HDB can revoke the permit and require reinstatement.

Reinstating a structural element needs an engineer's assessment, not just a rebuilt wall. See regularisation of unauthorised works.

How is a condo different?

In a condominium the gatekeeper is the management corporation (MCST), not HDB, and BCA's advisory of 14 January 2014 asks MCSTs to require a PE's endorsement for any demolition other than floor tiles. Two differences stand out:

  • The PE certifies on the renovation plan that no structural element will be altered or demolished, after personally checking the approved structural plan and inspecting the unit.

  • If structural elements are involved, the works need plans approved by the Commissioner of Building Control, a permit and supervision by a Qualified Person.

The full account is in PE endorsement for condo renovation. For landed homes, see PE endorsement for renovation.

Common mistakes

  • Judging a wall by tapping it. The floor plan and the approved structural drawings are the reference, and RC stiffeners and lintols are often hidden inside what looks like a brick wall.

  • Carrying on after steel bars appear.

  • Treating the household shelter as an ordinary storeroom wall.

  • Assuming the PE's involvement replaces the HDB permit. It does not. See when PE endorsement is required and when it is not.

FAQ

Do I need PE endorsement for hacking a wall in my HDB flat?

You need HDB's permit for any wall demolition. A PE is required when the element is non-load bearing reinforced concrete, such as an RC partition wall, party wall, stiffener, lintol or hanger, and HDB will tell you after it receives the application.

Can a PE approve hacking a structural wall in an HDB flat?

No. HDB lists the hacking and removal of structural members such as reinforced concrete walls, columns, beams and slabs as disallowed works.

How much does HDB PE endorsement cost?

There is no fixed figure. The cost depends on the elements being removed, the number of site visits and any repair the PE has to specify. Our cost article explains the drivers.

What is the fine for illegal hacking in an HDB flat?

HDB states that breaching its renovation rules can lead on conviction to a fine of up to $5,000, and it can require the flat to be reinstated.

What does a PE endorsement actually mean?

It is a registered engineer's professional certification of specific work. See PE endorsement meaning.

Sources

CVC Engineers advocates education and public awareness, and has a dedicated team to help resolve this properly, including PE endorsement for renovation works. WhatsApp +65 9342 7551. Last reviewed: November 2026.

Recent Posts

See All

Comments


© 2024 CVC Engineers. All rights reserved.

bottom of page