top of page
CVC Engineers Pte Ltd

History of the Professional Engineer System in Singapore: Origin and Purpose

7 days ago
9 min read

Singapore's Professional Engineer (PE) system was created by Parliament, not by any one person. The Professional Engineers Act 1970 was passed on 26 June 1970 "to establish a Professional Engineers Board" and "make provision for the registration of professional engineers", and the Professional Engineers Board (PEB) states that it has been established since 1971. The purpose has not changed in more than fifty years: work that affects life, health and property must be designed, checked and signed by a named, registered and accountable engineer. This article sets out the dated steps, what each one was for, and how they lead to the PE endorsement that owners and contractors are asked for today.

Who invented the licensing of engineers, and why?

No individual invented it; legislatures did, starting in the United States. According to the timeline published by the National Council of Examiners for Engineering and Surveying (NCEES), California passed the first surveying licensure law in 1891 and Wyoming passed the first engineering licensure law in 1907. In 1920, seven of the ten state boards that then had licensing laws met in Chicago and founded the council that became NCEES.

The idea behind those laws is simple. A member of the public cannot judge whether a bridge, a boiler or a building frame has been designed competently. The state therefore restricts certain engineering work to people whose education, experience and conduct it has tested, keeps a public register of them, and removes those who fall short.

The British tradition that Singapore inherited reached the same result by a different road: professional institutions admitted members after examination and supervised experience, and membership became the mark of competence. Singapore's first Act combined the two approaches, as the next section shows.

How were engineers recognised in Singapore before 1970?

Before the 1970 Act there was no Professional Engineers Board; recognition came from institution membership and from the architects' legislation. The 1970 Act itself is the evidence. Its section 8 entitled three groups to registration:

  • any person holding corporate membership of the Institution of Engineers, Singapore, or of other professional bodies approved by the Board;

  • any person who, immediately before the Act came into operation, was engaged in the practice of engineering in Singapore and was registered under the Architects Ordinance, if he applied within twelve months;

  • any person who passed the final examination for the Bachelor of Engineering degree of the University of Singapore, or other examinations approved by the Board, and had at least two years of practical experience.

The Institution of Engineers, Singapore (IES) says it was formally established in July 1966 as the national society of engineers. So by 1970 Singapore had a national institution, a local engineering degree and practising engineers recognised under the architects' law. What it lacked was a single statutory register for engineers.

Timeline: the Professional Engineer system step by step

Each step below added one layer of accountability. Dates are taken from the Acts as published in the Government Gazette and archived by PEB, and from the agencies named.

  • 1891 and 1907: California passes the first surveying licensure law and Wyoming the first engineering licensure law (NCEES). Purpose: restrict practice to tested, registered persons.

  • July 1966: IES is formally established as the national society of engineers (IES). Purpose: a professional body to represent and develop engineers.

  • 26 June 1970: Parliament passes the Professional Engineers Act 1970 (No. 29 of 1970), assented to on 24 July 1970. It creates PEB as a body corporate with a President and nine members, three of them nominated by the Council of IES and one by the Board of Architects. Purpose: a statutory register and a board to keep it.

  • 1971: PEB is established under the Act (PEB).

  • 1977 and 1980: amendment Acts are passed (PEB archive). We have not reviewed their content, so we do not describe it.

  • 15 March 1986: the six-storey Hotel New World building collapses, killing 33 people (SG101, a Singapore Government site).

  • 16 February 1989: the Building Control Act is passed (SG101). Purpose: independent checking of structural design and periodic inspection of existing buildings.

  • 28 June 1991: Parliament passes a new Professional Engineers Act 1991 (No. 23 of 1991), assented to on 24 July 1991, replacing the earlier Act. It contains Parts on practising certificates, on licences for multi-discipline and corporate practice, and on liability insurance. Purpose: separate "being on the register" from "being allowed to practise this year", and regulate firms as well as individuals.

  • 23 January 1995: the Professional Engineers (Amendment) Act 1995 is passed. It adjusts the conditions for licensed corporations, including who may be directors. Purpose: keep engineering firms under the control of registered professionals.

  • 2 September 2003: the Building Control (Amendment) Act 2003 is passed with related amendments to the Professional Engineers Act. One of them lets the Board refuse a practising certificate if it is not satisfied that the applicant has met the prescribed continuing professional education requirements. Purpose: tie the right to practise to keeping knowledge current.

  • 20 April 2004: the temporary retaining wall system of a deep excavation beside Nicoll Highway collapses, and four people die (Committee of Inquiry interim report).

  • 15 August 2005: the Professional Engineers (Amendment) Act 2005 (No. 27 of 2005) is passed; its provisions commence on 1 October and 1 December 2005. It requires at least four years' practical experience and a pass in the examination prescribed by the Board, creates a register of specialist professional engineers, and extends licensing to limited liability partnerships. Purpose: a uniform examined standard, and recognition of specialised branches.

  • 2006 and 2007: PEB's published results begin in 2006 for the Fundamentals of Engineering Examination and in 2007 for the Practice of Professional Engineering Examination.

  • June 2006: IES, through its Engineering Accreditation Board, obtains full signatory status in the Washington Accord (IES). Purpose: international recognition of accredited engineering degrees.

  • 20 September 2007: the Building Control (Amendment) Act 2007 (No. 47 of 2007) is passed, assented to on 2 October 2007. It defines a "geotechnical engineer" as a PE registered as a specialist professional engineer in geotechnical engineering, and creates the "specialist accredited checker". Purpose: specialist design and independent checking of deep excavations and tunnels.

  • 1 January 2017: specialist PE branches for lift and escalator, crane, access platform and pressure vessel engineering take effect (PEB). From 18 January 2017 an oral examination route is open to previously registered and highly experienced applicants (PEB registration guidelines).

  • April 2019: the Professional Engineers Rules are amended so that a firm's licence can state the branches of engineering it is authorised to provide (PEB annual report for 2019).

  • 31 March 2026: 4,731 PEs are on the register and 2,683 hold practising certificates; 507 specialist PEs are registered across eight branches; 298 corporations and partnerships are licensed (PEB annual report for FY2025).

What did the 1970 Act actually set up?

The 1970 Act set up three things: a Board, a register and a definition of the work that needed protecting. It defined professional engineering work as professional service such as consultation, investigation, evaluation, planning, design or responsible supervision of construction or operation, in connection with utilities, structures, buildings, machines, equipment, processes, works or projects "wherein the public interest and welfare, or the safeguarding of life, public health or property is concerned or involved". That phrase is the origin of the system in one line. It also made it an offence for an unregistered person to practise as a professional engineer.

What happened at Hotel New World, and what followed?

The Hotel New World collapse of 15 March 1986 killed 33 people and was followed three years later by the Building Control Act. SG101 gives the cause as structural faults, shoddy design and haphazard construction, with lax maintenance, and says the catastrophe "led to far-reaching reforms" in the building industry. A commission of inquiry reached the same conclusion on cause, as reported by Yahoo News Singapore in 2021.

According to SG101, buildings built in the 1970s were checked for structural faults, and the Building Control Act passed on 16 February 1989 brought in two lasting mechanisms:

  • structural designs counter-checked by an independent Accredited Checker;

  • building checks every five years, the origin of today's periodic structural inspection, which the Building and Construction Authority (BCA) now requires every 5 years for non-residential buildings and every 10 years for residential buildings.

For the PE system the lesson was that one engineer's signature is not enough on its own. A second, independent engineer checks the design, and another inspects the building through its life.

What happened at Nicoll Highway, and what followed?

On 20 April 2004 at about 3.30 pm the temporary retaining wall system of a 33 metre deep excavation for a Circle Line cut-and-cover tunnel collapsed beside Nicoll Highway, and four people died. The Committee of Inquiry's interim report of September 2004 described it as the deepest excavation in marine clay in Singapore. Its interim recommendations included a comprehensive engineering review of all ongoing deep excavations, designing temporary works to the same codes and safety factors as permanent works, and a thorough check of temporary works design by a competent designer.

Two legislative steps followed. The 2005 amendment to the Professional Engineers Act created the register of specialist professional engineers. The Building Control (Amendment) Act 2007 then treated major geotechnical works "as if these were building works for permanent buildings involving key structural elements", in the words of the Bill's explanatory statement, which describes the works as mostly excavations more than 6 metres deep or tunnels more than 2 metres in diameter, width or height. The explanatory statement does not name the collapse, so we say only that these changes followed it. The present rules are explained in our guide to deep excavation and AC(Geo) requirements.

Which law governs what today?

Two Acts work together. The Professional Engineers Act 1991 governs the person: registration, practising certificates, specialist registers, licensed firms and discipline, all administered by PEB, a statutory board under the Ministry of National Development. The Building Control Act 1989 governs the building: it makes a PE with a valid practising certificate a Qualified Person, requires structural plans to be submitted by a QP who is a PE in the civil or structural discipline, and provides for Accredited Checkers and periodic inspections, administered by BCA. Our article on PE endorsement versus QP submission explains how the two meet on a project.

Common misunderstandings about the history

Most misunderstandings come from treating the PE stamp as paperwork rather than as the end product of this history.

  • "The PE system is a recent invention." The Act dates from 1970 and the Board from 1971.

  • "A PE is a member of a society." Registration is statutory. IES is a separate professional institution.

  • "Once registered, always entitled to endorse." Since the 1991 Act the law has distinguished registration from the annual practising certificate. See how to check a Professional Engineer.

  • "Checking and inspection rules are red tape." Independent checking and periodic inspection each followed a fatal collapse.

Why the system exists

The system exists so that, for every structure the public depends on, there is an identifiable professional who is independent enough to say no and who answers personally for the result. PEB states its mission as safeguarding "life, property, and welfare of the public". Registration tests competence, the practising certificate keeps it current, independent checking catches the errors one person can make, and discipline removes those who fail. An endorsement is that whole chain condensed into one signature, which is why it matters what a PE endorsement carries.

FAQ

When was the Professional Engineers Board established?

PEB states that it has been established since 1971 under the Professional Engineers Act. The first Act was passed by Parliament on 26 June 1970 and assented to on 24 July 1970.

Who started the Professional Engineer system in Singapore?

Parliament did, through the Professional Engineers Act 1970. The first Board had three members nominated by the Council of the Institution of Engineers, Singapore, and one nominated by the Board of Architects.

Which country licensed engineers first?

The United States. NCEES records that Wyoming passed the first engineering licensure law in 1907, after California passed the first surveying licensure law in 1891.

Did the Hotel New World collapse create the Accredited Checker system?

SG101, a Singapore Government site, says the 1986 collapse led to far-reaching reforms and that the Building Control Act passed in 1989 required structural designs to be counter-checked by Accredited Checkers.

When did the PE examinations start?

The 2005 amendment required applicants to pass the examination prescribed by the Board. PEB's published results begin in 2006 for the Fundamentals of Engineering Examination and 2007 for the Practice of Professional Engineering Examination. The route is described in how to become a Professional Engineer.

When were specialist Professional Engineers introduced?

The register of specialist professional engineers was created by the 2005 amendment. Further branches took effect on 1 January 2017, and at 31 March 2026 there were eight specialist branches. The numbers are in our PE statistics page.

Sources

CVC Engineers advocates education and public awareness, and has a dedicated team to help resolve this properly, including PE endorsement services and professional engineer consultation. WhatsApp +65 9342 7551. Last reviewed: November 2026.

Recent Posts

See All

Comments


© 2024 CVC Engineers. All rights reserved.

bottom of page