Drones and Technology in Facade Inspection in Singapore: What BCA Allows
BCA allows drones to be used for the full visual stage of a Periodic Facade Inspection (PFI), and its PFI page states that the Commissioner of Building Control has approved unmanned aircraft systems operated by accredited service providers for that purpose. Drones do not replace the close-range stage: the Competent Person must still carry out a hands-on inspection of at least 10% of each elevation, and infrared thermography and other technologies need the Commissioner's approval. The drone operator must separately hold the Civil Aviation Authority of Singapore (CAAS) permits for business flights, and the data captured is subject to the Personal Data Protection Act.
What does BCA allow drones to do in a facade inspection?
BCA allows drones to capture the 100% visual survey of the facade, which is the first of the two PFI stages. BCA's PFI Frequently Asked Questions describe that stage as a visual inspection of the entire facade from ground level or other vantage points, which may be done with photographic cameras, and for which drones or similar unmanned aircraft designed for aerial survey may be used.
BCA's PFI web page now sets out the conditions:
The Commissioner of Building Control has approved the use of unmanned aircraft systems (UAS) operated by accredited UAS service providers for the visual inspection of building facades.
Before a visual inspection using an accredited UAS, the Competent Person must notify the Commissioner by indicating the UAS details in the BCA_BR_PFI01 e-Form.
The Competent Person, or a Facade Inspector under the Competent Person's supervision, must be present during UAS operations.
The Competent Person must personally review all inspection outputs, including photographs, images, readings and reports, and consult specially trained persons when necessary.
BCA's Guidelines on Periodic Facade Inspection (Version 1.3, September 2026) add that where a Competent Person intends to adopt technologies such as infrared thermography or drones, approval from the Commissioner is required, that a suitably qualified party must operate the equipment and interpret the results, and that TR 78 Parts 1 and 2 are to be referred to when drones are used. MND told Parliament that BCA's approval for technology-assisted facade inspections is typically issued within 3 working days.
For which buildings need a PFI at all, see periodic facade inspection in Singapore.
What can a drone not replace?
A drone cannot replace the close-range inspection. BCA's guidelines define close-range inspection as a close-up visual inspection with tactile assessment, meaning physical contact with the facade, covering at least 10% of the surface area of each elevation.
The reason is technical. A camera sees surfaces. Many of the defects that cause facade elements to fall are behind the surface: debonded plaster and tiles, hollow render, failed anchors and brackets, corroded fixings behind cladding. BCA's guidelines call for tapping rods or rubber mallets to detect delamination and hollowness, and a borescope to look at concealed supports behind cladding panels and cavity brick walls. Where concealed supports cannot be inspected with equipment, the guidelines call for localised removal of selected panels.
BCA's FAQ gives the context: on average more than 20 incidents of fallen facade elements are reported to BCA every year.
What must the Competent Person still do personally?
The Competent Person remains responsible for the inspection and its conclusions, whatever technology is used. A Competent Person for PFI is a Professional Engineer or Registered Architect who has completed the Certificate in Facade Inspection. From BCA's page, FAQ and guidelines, the Competent Person must:
Plan the inspection methodology, including the risk assessment for the inspection team, occupants and the public.
Take what BCA's FAQ calls an active and personal interest in planning and carrying out the inspection.
Attend the visual and close-range inspections personally, or through a Facade Inspector who is directly under the Competent Person's control and supervision.
Select the areas for the 10% close-range inspection, based on the visual findings, past reports, the volume of human traffic below and the deterioration risk of each facade element.
Personally review all outputs from drones and other equipment.
Notify the Commissioner of Building Control immediately if unsafe defects are found, and work with the owner on safety measures.
Sign and submit the inspection report. Where drones are used, the report includes the UAS inspection report set out in TR 78-1.
BCA's FAQ also notes that testing laboratories may assist with close-range inspection only with the Commissioner's prior approval, and that the Competent Person stays ultimately responsible. A Competent Person must have no professional or financial interest in the building. See PSI vs PFI in Singapore for who qualifies.
What CAAS permits does a drone facade inspection need?
A facade inspection is a business flight, and CAAS requires an Operator Permit and a Class 1 Activity Permit for business operations regardless of the drone's weight, location or height. This is separate from anything BCA requires. The CAAS requirements, as stated on its unmanned aircraft pages:
Registration: any unmanned aircraft with a total weight above 250 g must be registered before it is flown.
Operator Permit: issued to an organisation or individual that shows it can operate safely. CAAS assesses organisational set-up, safety procedures including risk assessment, airworthiness of each aircraft and personnel competency. Valid for one year. CAAS lists a processing time of 10 working days and a fee of S$700 for the first aircraft type.
Class 1 Activity Permit: required where the activity is not recreational or educational. It is not valid without an Operator Permit. CAAS lists a processing time of 5 working days and a fee of S$120 per activity or block of activities.
Pilot: a UA Pilot Licence is required for business operations.
Flight management: Operator Permit holders must subscribe to the Centralised Flight Management System, and a tracker must be attached to aircraft above 250 g before flying.
Protected areas: a separate permit from the Singapore Police Force is needed to fly in a protected area, and flying in prohibited areas is not allowed at any time.
CAAS notes that processing times depend on the complexity of the operation and the completeness of documents. MND told Parliament that in 2022 CAAS and other agencies set up a "green lane" under which activity permits for lower-risk locations are processed within 3 working days.
For a building owner the practical point is simple: ask the drone service provider for its Operator Permit, the Activity Permit for your site, and the pilot's licence before the flight date. A facade inspection near an aerodrome, a military airbase or a protected area takes more planning.
What is TR 78, and who are accredited drone service providers?
TR 78 is the Singapore Technical Reference for building facade inspection using unmanned aircraft systems, and accreditation against it is run by the Singapore Accreditation Council (SAC). MND told Parliament that BCA published two Technical References in 2020 with specifications for using UAS in facade inspections, and that BCA and Enterprise Singapore launched a UAS accreditation programme in 2023.
TR 78-1 covers building facade inspection using UAS, including the inspection report format.
TR 78-2 covers quality management and the application of artificial intelligence.
SAC opened a new accreditation area for building facade inspection using drones under its Inspection Body scheme, effective 12 July 2023, with assessment based on ISO/IEC 17020:2012 and the two parts of TR 78. BCA recognises accredited inspection bodies under the PFI regime.
BCA's PFI page says the industry is encouraged to engage only accredited UAS service providers, and that they can be verified on the SAC website by searching accredited organisations for "building facade inspection". BCA's FAQ adds that engaging a drone service provider is a private contractual matter between the owner and the provider, and that owners should take the Competent Person's advice on the quality and adequacy of the method.
Is AI defect detection accepted?
AI-assisted defect detection is recognised as a tool within the drone inspection workflow, but it does not sign off a facade. TR 78-2 addresses the application of AI, and SAC's 2023 announcement notes that drones combined with data analysis and AI can speed up the capture and analysis of defects and reduce physical inspection in high-risk environments.
What AI does in practice is sort thousands of images and flag candidate cracks, stains, spalls and displaced panels for a person to review. BCA's requirement that the Competent Person personally review all inspection outputs applies to AI-flagged results as much as to raw photographs. Image-based detection also shares the camera's limit: it does not find hollowness or failed fixings behind a sound-looking surface.
On public sector work, MND's parliamentary answer said the Government is investing in research and development on facade inspection technologies, that DSTA, HDB and JTC are studying UAS combined with robotics for cleaning building facades, and that the use of UAS for maintenance and repairs is still nascent. Separately, MND said in September 2025 that HDB is studying technologies such as microwave scanning to trace water seepage through concrete.
Where does infrared thermography fit?
Infrared thermography supplements the close-range inspection and does not replace it. BCA's FAQ is direct on this: thermography is used to supplement the close-range inspection and identify underlying defects, the Competent Person must still carry out the 10% close-range inspection, and the Commissioner's approval is needed before the technology is used. BCA's guidelines refer to TR 119:2024, Qualitative Inspection of Building Facade Using Infrared Thermography.
Thermography works by detecting small surface temperature differences. A debonded tile or hollow patch of render heats and cools differently from well-bonded material, so it can show as an anomaly. As a general engineering point, results depend on sun exposure, time of day, surface finish and weather, which is why interpretation by a trained person and confirmation by tapping are needed.
BCA's FAQ also lists robotic automated tapping devices and infrared and ultrasound scanners as technologies that can be adopted for close-range inspection, with the Commissioner's prior approval.
Gondola, lift platform or drone: which access method is used when?
Drones serve the visual stage; the close-range stage needs a person at the facade on an access platform. BCA's guidelines ask the Competent Person to choose access methods after considering the building's existing maintenance access and surroundings.
Drone: full visual survey of all elevations, including areas that cannot be seen from the ground or neighbouring vantage points. BCA's report template asks the Competent Person to explain why a drone was not used and what vantage locations were used instead.
Gondola or suspended working platform: the usual means of close-range access on tall buildings, and the owner's responsibility to provide.
Mobile elevating work platforms, boom lifts, scissor lifts and mast climbers: named in BCA's guidelines as alternatives where a gondola is not feasible, typically for lower elevations and podiums.
Building maintenance unit: the building's own system, where one exists.
Scaffold: listed in BCA's FAQ among the access systems an owner may need to provide.
BCA's documents do not list rope access among their examples; they leave the choice of access to the Competent Person, subject to the Ministry of Manpower's work-at-height requirements and certified operators for the equipment used. Suspended platforms and scaffolds are themselves engineered temporary structures, covered in PE endorsement for scaffolds.
What about residents' privacy and personal data?
Drone operators must comply with the Personal Data Protection Act (PDPA), and TR 78 adds specific data protection obligations for facade inspections. BCA's FAQ explains that drones used for facade inspection are meant to capture facade defects, not footage inside homes, faces or vehicle number plates, and that capture of such information should be avoided as far as possible.
Advance notice: BCA's FAQ says TR 78:2020 calls for at least 3 days of advance notice with details of the inspection.
Handling of footage: TR 78 sets out how images and video are to be handled and requires systems to prevent unauthorised use. If private information is unintentionally captured, the service provider must keep it secured.
PDPC guidance: Chapter 5 of the Personal Data Protection Commission's Advisory Guidelines on the PDPA for Selected Topics (revised 23 May 2024) says organisations should consider whether their drones are likely to capture personal data, provide notification that specifies whether photography or video recording is taking place, for example by notices at entry points to the area, keep to the pre-determined flight path, and adopt policies restricting or prohibiting use of personal data collected unintentionally.
An MCST should therefore give residents written notice of the dates, elevations and purpose, and ask them to close windows and curtains. Record-keeping duties are covered in building maintenance duties of MCSTs.
What goes wrong with drone facade inspections?
The common failure is treating the drone survey as the whole inspection. Problems seen in practice follow from the rules above:
Commissioning a drone survey directly and presenting it as a PFI, without a Competent Person planning, attending and reviewing it.
Skipping or thinning the 10% close-range inspection because the images look clean.
Engaging a provider without checking SAC accreditation or CAAS permits for the site.
Not notifying the Commissioner of the UAS details before the inspection.
Poor notice to residents, leading to complaints and lost flying days.
Accepting AI-generated defect lists without a person checking them against the facade.
FAQ
Can a drone inspection alone satisfy the Periodic Facade Inspection?
No. A drone can serve the 100% visual stage. The Competent Person must still carry out a close-range inspection with physical contact on at least 10% of each elevation.
Do I need BCA's approval to use a drone for PFI?
BCA's PFI page says the Commissioner has approved accredited UAS providers for visual inspection, and the Competent Person must notify the Commissioner of the UAS details in the e-Form before the inspection. Other technologies, such as infrared thermography, need the Commissioner's approval.
Who applies for the CAAS permits?
The drone service provider, as operator. It needs an Operator Permit and a Class 1 Activity Permit for a business flight, and its pilot needs a UA Pilot Licence.
Can I fly my own drone to check my building's facade?
Any flight for a business purpose brings in CAAS's business requirements, and a private survey does not count as a PFI. For a statutory inspection the survey must be planned, attended and reviewed by the Competent Person.
Does thermography count towards the 10% close-range inspection?
No. BCA's FAQ says thermography supplements the close-range inspection and the 10% hands-on inspection is still required.
Will the drone record inside my flat?
It should not. BCA's FAQ says capture of private information should be avoided as far as possible, and any unintentionally captured data must be kept secured. TR 78 calls for at least 3 days of advance notice.
Does PFI apply to my building?
PFI applies to buildings more than 13 metres high and at least 20 years old, every 7 years, excluding landed houses used for residential purposes and temporary buildings. See our building inspection hub and our note on inspecting old buildings.
Sources
CVC Engineers advocates education and public awareness, and has a dedicated team to help resolve this properly, including building inspection services and PE endorsement of access structures. WhatsApp +65 9342 7551. Last reviewed: November 2026.


Comments